Zitzi Guppy, User Manual

Page: 14 / 40

User manual - Zitzi Guppy I 14 © Anatomic SITT AB
Installation of caster
Caster positioning
Insert the pin (A) underneath the chassis as illustrated. Then mount the front
wheel house (K) using screw (B), washer (C) and the eccentric nut (D) and tighten.
You kan adjust the castors in five different height positions. This allows you to
adjust the castor height after positioning the driving wheels.
Caster
Obs!
OBS! Secure that the screws is properly tighten after the adjustment.
Mounting of the caster on the caster house fork
Mount the caster (F) into one of five different positions by using the caster fork
(K), the supplied axle (G), washer (H) and lock nut (I).
Place the caster (F) in the caster fork (K). Provide the axle (G) with a washer (H)
and lead the axle into one of the five provided holes and the caster. Mount a
washer (H), lock nut (I) on the other side and tighten. Finish by placing a nut
cover (J) over the lock nut. See the picture below.
I
J
G
A
D
C
B
H
J
F
K
E