Dokumenten - Nr.: MG_DKA50001
Änderungsindex: 00
Freigabedatum: 07.04.2005
U
U
U
Usssser
er
er
er Manual
Manual
Manual
Manual „„„„Keramikofen 1500“
Keramikofen 1500“
Keramikofen 1500“
Keramikofen 1500“
H:\Bestellblock, Gebrauchsanweisung, Broschüren, Plakate\Instruktionen, Bedienungsanleitungen\Bedienungsanleitung Sinterofen\MG_DKA50001_00
Ofenbedienung - englisch.doc
Seite 3 von 3
6.
6.
6.
6.
Error messages / Solutions
Error messages / Solutions
Error messages / Solutions
Error messages / Solutions
Error Message
Error Message
Error Message
Error Message
Possible cause
Possible cause
Possible cause
Possible cause
Solution
Solution
Solution
Solution
„High Temperature
OFF“
Connecting plug between thermo element
and controller has been removed during
operation.
Reconnect the plug and delete
error message (press the two
left buttons on the controller
simultaniously)
Sintertime too long,
Error message 5,bs
-
Wires on the thermo element are broken,
check by carefully pulling
-
Contacts on the square ceramic clamp
next to the thermo element are loose
-
Contacts inside of the thermo element's
plug are loose (grey plug with two
copper pins)
-
The plug of the thermo element has been
pushed by force into the wrong position
-
Defective display
- Change thermo element
-
Tighten contacts carefully with
a screw driver
-
Open cover of the plug and
tigten contact with a
screwdriver
-
Move plug into right position
-
Change display
