Zippy Tech. R3G SERIES Product Manual Download Page 16

                                           

 

   

          The “RELIABILITY “ solution to E-application 

新巨企業股份有限公司

 

ZIPPY TECHNOLOGY CORP. 

POWER DIVISION 

 

    HEADQUARTERS 

          10F, NO. 50, MIN CHYUAN RD., SHIN-TIEN CITY,   

     TAIPEI HSIEN, TAIWAN, R.O.C. 

     TEL: 886-2-29188512                    FAX: 886-2-29134969 

     WEB SITE: 

http://www.zippy.com.tw

              E-mail

[email protected]

           

 

   USA OFFICE 

U.S. East (Atlantic) 

11 Melanie Lane, Unit 1B East Hanover, NJ 07936 

TEL

1-973-463-9499                   FAX

1-973-453-8014  

E-mail

[email protected]  

 

U.S. West (Pacific) 

961 CALLE NEGOCIO, SAN CLEMENTE CA 92673, USA             

TEL: 1-949 366 9525                     FAX: 1- 949 366 9526 

EMAIL: [email protected]                                 

 

CANADA OFFICE

 

ZIPPY TECHNOLOGY CANADA INC. 

Unit3-3671 Viking Way Richmond, B.C V6V 2J5 Canada   

TEL

1-604-278-6615                   FAX

1-604-278-6624 

CELL: 1-778-288-9622                  E-mail

[email protected] 

 
 

    Note:   

    *The description stated herein is subject to change without prior notice. 

    *All brand names and trademarks are the property of their respective owners

 

 

Summary of Contents for R3G SERIES

















Reviews: