Install Post over Anchor Pipe
If your ground is dry and hard, use a claw hammer to loosen
2” or 4“ of dirt around the base of the pipe. This will allow the
vinyl post to easily insert itself into the ground in step 2 below.
Orient post correctly with tabs at top and slide the vinyl post
over the anchor pipe down into the ground.
Using a wood block (or something to protect the top of the
vinyl extrusion), pound down the post another 2” to 4”
below the ground.
Repeat for second post.
1
STEP T WO
2
3
All American Vinyl Picket Fence Instructions
2
1
3
Optional
Optional:
Important
!
The bottom of the vinyl post must penetrate 2” to 4”
below the ground to prevent it twisting on the pipe.
