WWW.
ZIPPITY
-OUTDOOR.COM
8
ASSEMBLY
INSTRUCTIONS
ZP19019
STEP 4:
FINISH
GATE ASSEMBLY
STEP 4.1
STEP 4.3
STEP 4.4
STEP 4.2
Insert Pickets
(E)
down through the Top
(H)
Align the pre-drilled
hole on the Latch
Finger
(P)
to the empty
pre-drilled hole on the
Top Rail. Fasten with
(2) ⅝
” Black Self-Drill-
ing Stainless Steel
Screws.
Fasten the Gate Hinges
(N)
to one side of the
gate
with (8) ⅝
” Black Self-Drilling Stainless
Steel Screws
(M)
as shown. The Gate Hinges
should be about 1” away from the Top and
1
1in.
1
2
2
3
3
4 4
E
H
Note:
Do not fasten
the inside of the gate
hinges yet.
M
P
N
Note:
There is only one
pre-drilled hole on this end
of the Top Rail. The second
½” Self-Drilling Stainless
Steel Screw can be drilled
into the vinyl without a
pre-drilled hole.
