WWW.
ZIPPITY
-OUTDOOR.COM
6
ASSEMBLY
INSTRUCTIONS
ZP19008
STEP 3:
FINISH
ASSEMBLING SCREEN
F
STEP 3.1
STEP 3.2
Slide the bottom rail down over the bottom
of the posts, aligning the pre-drilled holes on
the bottom rail with the pre-drilled holes in the
posts. Insert each picket into the bottom rail.
10 in
1.
Slide the Post Anchors
(F)
6" into the bottom of
the post. 10" of post anchor should be visible.
2.
Use the 1/8" Drill Bit
(K)
to drill (4) total holes in
the post anchor through the pre-drilled holes in the
bottom rail.
3.
Drive (4) 3/4" self-drilling stainless steel screws
into the pre-drilled holes in the bottom rail.
2
3