background image

WWW.

ZIPPITY

-OUTDOOR.COM

2

ASSEMBLY 

INSTRUCTIONS

ZP19048

 

k

Check the inside of the larger pieces in your box for other 

materials packed inside.

 

k

When assembling components, place on a non-abrasive 

surface (i.e. shipping box) to avoid scratching.

 

k

We recommend an area approximately 5’x 8’ for 

unobstructed assembling.

 

k

You should not need to use excessive force when assembling 

components.

VISIT OUR WEBSITE  FIRST,  

SO WE CAN HELP YOU RIGHT AWAY!

Although great care has been taken to ensure proper packaging 

and handling of this product, occasionally problems occur. If you 

discover any missing, damaged or defective parts, please visit 

our website to order replacement parts. If you experience any 

further trouble with your product, please contact our customer 

service department.

  

parts.nychbrands.com

  

[email protected]

  704-892-5222 

/

 877-234-6196

Customer service agents are available to take calls weekdays from 

9am-

5pm EST

. If you call outside of business hours, please leave a voicemail.

To help you quickly and accurately, please have reference item 

number 

ZP19048

 and the specific part name which can be found 

on page 4. It is helpful if you can provide the batch lot which is a 

stamped number inside the box.

If you are having problems with the assembly or installation of 

this product, we are happy to assist you with the process, 

so 

please give us a call at 

704-892-5222

 /

 877-234-6196.

If for some reason you need to return this product, please 

allow us to help resolve your issues first. If you still decide to 

return the product, 

you will need to initiate the return from the 

company you originally purchased from.

GENERAL

 

INFORMATION

MISSING

 OR 

DAMAGED

 PARTS?

NEED 

ASSEMBLY 

HELP?

NEED TO 

RETURN?

IMPORTANT

Summary of Contents for WASHINGTON












Reviews: