WWW.
ZIPPITY
-OUTDOOR.COM
9
ASSEMBLY
INSTRUCTIONS
ZP19049
STEP 6:
INSTALL
GATE WINGS INTO THE GROUND
STEP 6.1
Move the gate wings to their final location and identify the location of the posts. The
distance between the posts should be 39½” or 36¾” between the ends of the horizontal
rails as shown below.
Attempt to push the posts into the ground at the marked locations. If your ground is too
hard, follow these steps illustrated below:
1.
Loosen the top 6” to 8” of the ground using a claw hammer or similar tool.
2.
Add water to soften the soil.
3.
Use a block of wood to protect the top of the post and gently hammer each post into
the ground until the bottom horizontal rails are roughly 2” above the ground.
39½”
36¾”
STEP 6.2
1
2
3
