WWW.
ZIPPITY
-OUTDOOR.COM
6
ASSEMBLY
INSTRUCTIONS
ZP19056
Steps 5.2-5.3 are only to be completed
if ground is too hard for Step 5.1.
1.
Loosen the top 6” of ground with claw
hammer.
2.
Add water to loosen soil.
3.
Use a block of wood to protect the
post, and lightly hammer the posts into
the ground.
STEP 5.2
1.
Move the fence panel to its final location, and mark the location of the posts.
2.
Attempt to push fence panel into the ground until the post anchors are entirely in the ground.
2
1
STEP 5:
INSTALL
FENCE INTO GROUND
STEP 5.1
Block of wood
3
1
2
Push into
the ground
with your
hands
Summary of Contents for ROGER RABBIT
Page 9: ......
