WWW.
ZIPPITY
-OUTDOOR.COM
9
ASSEMBLY
INSTRUCTIONS
ZP19024
STEP 6:
INSTALL
SHOWER RODS AND BEAMS
- REQUIRES 2 PEOPLE
Pressure fit the Post Caps
(E)
onto each
post as shown.
Slide (2) Shower Rods
(L)
into the
smaller routed holes in the posts until
they hit the back wall of the posts.
STEP 7.1
STEP 6.1
STEP 7:
INSTALL
POST CAPS
STEP 6.2
Apply a small amount of Vinyl Weld Glue
(P)
to the
inside of each Decorative End Cap
(F)
. Attach the
decorative end caps to the ends of the beams.
STEP 7.2
L
E
Align
The side of the beam with (9) pre-drilled
holes should face up.
F
P
1.
Slide (2) Beams
(I)
into the larger routed holes in the posts
until the pre-drilled holes in the beams and posts align.
2.
Drive (16) total 11/4” self-drilling stainless steel screws into
the pre-drilled holes in the posts to secure the beams.
I
1
2