WWW.
ZIPPITY
-OUTDOOR.COM
9
ASSEMBLY
INSTRUCTIONS
ZP19070
STEP 4:
INSTALL
GATE WINGS INTO THE GROUND
STEP 4.1
Space the gate wings so that the ends of the rails are 371/4” apart. The distance from the
outside of wing post to outside of wing post should be 381/2” as shown below.
Attempt to push the wing posts into the ground at the marked locations. If your ground is
too hard, follow these steps illustrated below:
1.
Loosen the top 6” to 8” of the ground using a claw hammer or similar tool.
2.
Add water to soften the soil.
3.
Use a block of wood to protect the top of the wing post and gently hammer each wing
post into the ground until the bottom wing rails are roughly 2” above the ground.
STEP 4.2
1
2
3
38 1/2 in
37 1/4 in