28
ZIPPIE SALSA R
2
/ ZIPPIE SALSA M
2
Rev.2.0
5.8.3 Standard Arm pad Position Adjustment
1. Fine arm pad position adjustments are possible by
loosening the 4.0 mm arm pad adjustment bolts (A-B).
(Fig.5.35)
2. With the bolts loosened slide the arm pad into the
desired position. A total of 100 mm of adjustment
is available via sliding the arm pad forward and
backwards, (Fig.5.36).
3. Retighten the adjustment bolts, (A-B). (Fig.5.35).
4. Use 10 N/m or 88.5 in/lb of torque.
ARMREST
HEIGHT
ARM PAD DEPTH
Fig. 5.36
5.9 Leg Rests
WARNING!
• Be aware of your environment to make sure you do
not injure your legs when Leg Rests are extended.
• Always ensure that the Leg Rests or foot plates do
not come into contact with the castors before driving
the wheelchair.
• Leg Rests are not to be used for lifting or carrying the
wheelchair under any circumstances.
• As with all moving parts be careful not to trap your
fingers.
5.9.1 Leg rest removal
To swing away the leg rest:
• Depress the retaining catch and swing the leg rest
out, (Fig.5.37).
• Lift the leg rest up and off if removal is required,
(Fig.5.38).
To refit:
• Line up the holes and studs, (Fig.5.39).
• Drop the leg rest into the receiver.
• Push the leg rest inwards until it clicks shut,
(Fig.5.40).
Fig.5.38
Fig.5.37
Fig.5.39
Fig.5.40
Fig. 5.35
