18
ZIPPIE SALSA & SALSA M
4.32 VR2 Controller (Fig. 4.21)
WARNING!
Avoid knocking your control system and especially the
•
joystick.
Be careful not to strike obstacles with the control
•
system or joystick when you drive.
Never drop the control system.
•
When transporting your wheelchair, make sure that the
•
control system is well protected.
Avoid damage to cables.
•
To improve the reliability of the control system keep
•
exposure to extreme conditions to a minimum.
Do not expose your control system or its components
•
to damp for prolonged periods.
If your control system becomes contaminated with food
•
or drink clean it off as soon as possible.
Fig. 4.14
Fig. 4.15
Fig. 4.16
Fig. 4.17
Fig. 4.18
Fig. 4.19
Fig. 4.20
Generally, the lap belt should be fixed so that the straps
sit at an angle of approximately 45° (Fig. 4.20). and when
correctly adjusted should not allow the user to slip down in
the seat.
4.4 Third party seating systems
WARNING!
Should you wish to fit a third party seating system, please
make sure that the seat surface of the seating system
overhangs the metal base plate by maximum 1 cm at the
front, in order to guarantee the dynamic and static stability
of the wheelchair.
On/off button
Horn
Speed Buttons
Joystick
Fig. 4.21
Speed Indicator
Battery Gauge
DANGER!
In the event of the wheelchair moving in an unexpected
•
way RELEASE THE JOYSTICK. This action will stop
the wheelchair under any circumstances
Do not operate the control system if the wheelchair
•
behaves erratically or shows abnormal signs of heating,
sparks or smoke. Turn the control system off at once
and consult your Sunrise approved dealer.
•
R-net Control
Please refer to your R-net Owner’s
Manual for details.
