MK-100301 EU_EN_Rev. 6.0 - US Rev. F
28
ENGLISH
ENGLISH
28
G. ANTERIOR TRUNK BUTTERFLY SUPPORT
WARNING
•
To avoid serious injury or issues with eating or breathing, the pelvic positioning
belt is required to be used in combination with the butterfly harness. Double-
check all adjustments to ensure there is no possibility of obstructing the airway or
any other undesired constrictions. Do not use the butterfly harness without the
pelvic positioning belt.
•
Sunrise Medical does not allow the transportation of a person in a vehicle with the
anterior trunk support as a restraint system.
Harness Adjustment:
28
1. Place the child in the seating system and fasten the pelvic positioning belt.
2. Position the child’s hips and tighten the belt to the proper position.
3. Connect the butterfly harness (A) (two styles) to the straps already fastened to the
positioning shell.
4. First, adjust the lower butterfly straps to keep the butterfly from riding up on the child’s
torso.
5. Then, adjust the upper straps making sure there is enough room around the child’s
neck for easy breathing and eating.
6. Once the butterfly straps are adjusted, snap the lower straps into the plastic tri-glide up
against the quick release buckle.
H. LATERAL TRUNK AND HEAD SUPPORTS (OPTIONAL)
Lateral and head support height and width adjustments:
29
30
NOTE
: The following adjustments may be able to be accomplished with the child present in
the seating system.
1. Loosen or remove if necessary, the two knobs (A) from the rear of the shell enough to
gain adjustment of the laterals.
2. Use shell slots, (outer, “B”, or inner, “C”), for height adjustment. Move the laterals up or
down to the proper position and tighten the knobs.
3. Use lateral bracket slots, “D”, for width adjustment or move from outer to inner shell
slots. Adjust the lateral brackets for width bringing the lateral assembly to the proper
position and tighten the knobs.
IX. DEALER SERVICE & ADJUSTMENT
28
A
29
A
30
B
D
C
