Zipper Mowers ZI-RMM94H-230V, Operation Manual

Page: 34 / 56

TROUBLESHOOTING
Z.I.P.P.E.R Maschinen Austria  www.Zipper-maschinen.at Seite34
ZI-RMM94H
15.6 Disposal
Do not dispose of the ZI-RMM94H in residual waste. Contact your local authori-
ties for information regarding the available disposal options. When you buy at
your local dealer for a replacement unit, the latter is obliged to exchange your
old
Do not dispose of your ZI-RMM95 in residual waste. Contact your local authorities for information
regarding the available disposal options. Run to the used oil to a separate environment-friendly
disposal.
16 TROUBLESHOOTING
Disconnect the machine from the power supply prior to any checks performed at the
machine itself!
Trouble Possible cause Solution
Turntable rotates in only
one direction
 Broken Rev.  Let´s replace the Rev.
Turntable does not rota-
te
 Broken belt
 Belt not tensioned
 broken Rev.
 engine failure
 change the belt
 Tension the belt
 Let's replace the Rev.
 Let's measure the power supply and
the motor an electrician. If motor is
defective - Replace the motor
Turntable blocked during
tire change
 belt slipping
 Clean / adjust belt
Opening / closing the
jaws to slowly
 silencer  on access to belts and mufflers clean
it!
Turntable does not lock
the wheel flange
 lack of supply of compressed
air
 Jaws defective
 Clamping cylinder defective
 Check the compressed air supply
 Replace the jaws
 Replace the clamp cylinder
Bead breaker pedal and
clamp opening/closing
pedal lock out of position
 Return spring broken  Replace spring
Bead breaking operation
difficult
 Silencer clogged
 Bead breaker cylinder gaskets
broaden
 Clean or replace silencer
 Replace gaskets