CLEANING, MAINTENANCE, STORAGE, DISPOSAL
32
ZI-RBMA1500
15.3.5
Serial bending in AUTO mode
NOTE:
Please set the required bending angles before
starting serial bending.
Example: Bending a stirrup
•
Afterwards set the Prog. ON-OFF switch (3) to
the "PROG.ON" position.
•
Press the following buttons:
o
1 x P3: 135°
o
3 x P2: 90°
o
1 x P3: 135°
•
The settings are saved by pressing the foot pe-
dal.
NOTE:
Bends are performed in the set sequence,
starting with the first bending angle entered.
NOTE:
A maximum of 9 bending angles can be pro-
grammed at once.
•
Set the MAN-AUTO switch (4) to "AUTO".
•
Press the foot pedal to start the serial bending
process.
•
The button of the current angle to be bent (P1-3)
lights up green.
NOTE:
Wait until the machine has completed the se-
rial bending. Then you can programme a new serial
bend.
16
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
WARN IN G
Danger due to electrical voltage!
Handling the machine with connected power supply may result in serious injury or death.
Always disconnect the machine from the power supply before maintenance
or repair work and secure it against unintentional reconnection.
16.1
Cleaning
Regular cleaning guarantees the long service life of your machine and is a prerequisite for its safe operation.
Incorrect cleaning products can attack the finish of the machine. Do not use any solvents, nitro
thinners or other cleaning products that could damage the machine's finish.
Observe the specifications and instructions of the cleaning agent manufacturer.
•
We recommend cleaning the machine immediately after each use with a brush.
•
Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible.
•
Wipe the equipment with a moist cloth and some soft soap or blow it with compressed air at
low pressure.
•
Prepare the surfaces and lubricate the bare machine parts with an acid-free lubricating oil (e.g.
WD40 rust inhibitor).
16.2
Maintenance
The machine is low-maintenance and only a few parts need to be serviced. Malfunctions or defects that
could affect your safety must be repaired immediately!
•
Before each operation, check the perfect condition of the safety devices.
•
Regularly check the perfect and legible condition of the warning and safety labels of the ma-
chine.
•
Use only proper and suitable tools.
•
Use only original spare parts recommended by the manufacturer.