SAFETY
17
ZI-PS330 & ZI-PS1000
10
SAFETY
This section contains information and important notes on the safe commissioning and handling of the
product.
For your safety, read this manual carefully before commissioning. This will enable you to
handle the product safely and thus prevent misunderstandings as well as personal injury
and damage to property. Pay special attention to the symbols and pictograms used on
the product as well as the safety information and danger warnings!
10.1
Intended use of the product
The product is intended exclusively for the following activities:
As an emergency power supply and charging station for various electronic devices such as (laptops,
TV, lights, smartphones, ....) , within the specified technical limits.
It cannot replace the stationary DC or AC power supply in your household..
N OTE
ZIPPER MASCHINEN assumes no responsibility or warranty for any other use or use be-
yond this and for any resulting damage to property or injury.
10.1.1
Technical restrictions
The product is designed for the work under the following conditions:
Relative humidity:
max. 65 %
Temperature (for operation):
-10° C to +45° C
Temperature (charging):
+0° C to +40° C
Temperature (Storage, Transport)
-20° C to +45° C
10.1.2
Prohibited applications / Dangerous misuse
•
Operating the product without adequate physical and mental fitness.
•
Operating the product without knowledge of the operating instructions.
•
Modifying the design.
•
Operating the product in wet and rainy conditions.
•
Operating the product in an explosive environment.
•
Operating the product outside the technical limits specified in this manual.
•
Removing the safety labels attached to the product.
•
Modifying, bypassing or overriding the safety devices of the machine.
•
Never leave the product unattended, especially when children are nearby!.
The non-intended use or the disregard of the explanations and instructions described in this manual will
result in the expiration of all warranty claims and compensation claims for damages against ZIPPER
MASCHINEN GmbH.
10.2
User Requirements
The product is designed to be operated by one person. The prerequisites for operating the product are
physical and mental fitness as well as knowledge and understanding of the operating instructions. Persons
who, due to their physical, sensory or mental capabilities, inexperience or lack of knowledge, are unable to
operate the product safely must not use the product without supervision or instruction by a responsible
person.
Please note that locally applicable laws and regulations determine the minimum age of the operator and
may restrict the use of this machine!
Work on electrical components or equipment may only be carried out by a qualified electrician or under the
guidance and supervision of a qualified electrician.
