MAINTENANCE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
Seite 19
HAND-DRUCKSPRÜHER / PRESSURE SPRAYER ZI-HDS 8L
ite 19
13
MAINTENANCE
After use, the surface of the Sprayer shall be
washed in an allowed cleaning site; the inner
part should be cleaned with high-pressure
injection till the drainage becomes clean.
Never use a hard object to remove the
impurities inside the spray hole. The O ring of
spray head shall be lubricated after cleaning.
After continuous use for one month or two
months or in case of use after storage for a
long time, it’s inevitable to coat the O-rings of
piston with Vaseline or lubricate of low
viscosity.
13.1
Disposal
Do not dispose the machine in residual waste. Contact your local authorities for information
regarding the available disposal options. When you buy at your local dealer for a
replacement unit, the latter is obliged to exchange your old.
