ZIPPER MASCHINEN ZI-RMTR40V-AKKU, User Manual

Page: 23 / 47

SAFETY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  23
ZI-RMTR40V-AKKU
11.2 Security instructions
Missing or non-readable security stickers have to be replaced immediately!
The locally applicable laws and regulations may specify the minimum age of the operator
and limit the use of this machine!
To avoid malfunction, machine defects and injuries, read the following security instructions!
GENERAL:
 Use the machine only in good enough light to allow a safe operation can be
guaranteed.
 In tiredness, decreased concentration or under the influence of alcohol or drugs,
the work on the machine is prohibited!
 Caution in slippery conditions - slip hazard - risk of injury. When working, robust
and non-slip footwear. Slides / stumble / traps are a major cause of serious
injury or death.
 Caution on uneven work surfaces and work surfaces with a slope!
 Make sure you always keep a safe distance and wear shoes with a non-slip sole
and long trousers. Always cut diagonally to the slope. Do not mow on
excessively steep gradients.
 Take extra care when walking backwards. You may stumble! Always work at a
walking pace, never run!
 The machine must be operated only by trained persons (knowledge and
understanding of this manual), which have no limitations of motor skills
compared with conventional workers.
 Unauthorized persons, especially children and not trained personnel must be
kept away from the running machine!
 If you pass the machine to third, these instructions must be attached to the
machine.
 Before each use, the reliability of the machine is to be checked (tightness of the
cutting tool, the proper function)
 Before the start, after the failure or shock, be sure to check the device and make
sure that it is in good condition
 Inspect the area to be cut before you begin work. Remove any foreign objects
(such as stones). Look out for foreign objects (such as stones) while you are
working.
 Never leave the machine unattended where you are working. If you stop work,
unplug the safety switch (if equipped) and store the machine in a safe place.
 Take special care when work near swimming pools or garden ponds.
 Never use the machine when it is raining or in damp, wet areas
 Unplug battery and safety switch (if equipped) before all maintenance and
settings!
LAWN MOWER:
 Do not grab in the cutting tool while it is rotating.
 Take care that you do not get under the cutting tool!
 Switch off the machine when it must be transported over another surface as
grass or it must be tilted for transport to and from a processing area.
 Use personal safety equipment: safety gloves (when working on the blades),
safety shoes, work wear when working with the machine
