ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
Strana 33
ZAHRADNÍ KULTIVÁTOR
/ SCYTHE MOWER AND GARDENING HOE ZI-KBMH800
33
•
Pull the two guide handles upwards and thus can be separated with the mower unit by
centrally lowering the transmission housing.
•
Remove the tire and replace it with the chopping blades.
Now the garden hoe can be used.
13
MAINTENANCE
A T T E N T I O N
No cleaning, maintenance, testing with the machine!
Therefore: Switch off the machine and let it cool before servicing!
The machine requires little maintenance and contains little parts that must undergo the operator
of a service. Faults or defects that may affect the safety of the machine must be rectified
immediately. Repair work may be carried out by qualified personnel!
Periodically, you should also check the bolts and screws are tight. Worn or improperly tightened
nuts and bolts can cause serious damage to the engine or frame
To reduce the risk of fire, clean the machine, especially the engine, exhaust and fuel tank.
Remove any grass residues, leaves or grease.
Regularly check the condition of the cutting deck.
Replace these parts if they are damaged.
Regularly check the oil level and add if necessary, add oil.
Grease regularly the wheel axle and the bearing.
Check the blade often to ensure a clean cut. The cutting blade should always be sharp.
If the blade hits an obstacle, stop the mower combination.
The direction to lift up the
handle rack
