OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
27
ZI-HST40V-AKKU
Adjust the working angle:
For high or low cutting the cutting head can be tilted.
Press up the locking button (
1
.).
Set the required working angle (
2
.).
Release the locking button until it clicks into place
Inserting/replacing the battery:
Charging the battery as described in the user
manual of the charger.
Press the charged battery into the power tool until it
clicks into place.
To remove, press the release button (
1
.) and pull
out the battery (
2
.).
Switching on:
First press and hold the switch interlock (
1.
).
Then press the On/Off switch (
2.
).
Switching off:
Release the On/Off switch.
The cutter bar stops immediately.
