MONTAGE / ASSEMBLY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
10
ZI-GAB165AN/ZI-GAB165GR
3.
Assembly front and rear panel
Assemble the front (P3) and back panel
(P4) to the corner brackets using
screws /nuts (F2) and washers (S3)
(see illustration on the left).
4.
Assembly braces
Bend the ends of the three braces (C4)
at right angles.
Assemble the braces (C4) using short
screws (F1) (see illustration on the
left).
5.
Assembly bottom plate
Now insert the base plate (P5) (see
illustration on the left).
Note: Make sure that the curved side
edge points downwards.
