MONTAGE / ASSEMBLY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
12
ZI-GAB100AN/ZI-GAB100GR
Now flip the product and fix the bottom
plate (P5) at the corners using short
screws (F1) and washers (S3) (see
illustration on the left).
10.
Assembly feet
Assemble the feet (S8) using long
screws (F8) (see illustration on the
left).
11.
Assembly edge protection
Assemble the left (S5) and right edge
protectors (S6) with the additional large
bore hole for the lock rod with short
screws (F1) and washers (S3).
Assemble the back edge protectors (S4)
on the rear side with short screws (F1)
and washers (S3) (see illustration on the
left).
12.
Assembly cylinder lock
Insert the cylinder lock (B1) from the
outside into the borehole at the front
panel.
On the inside, place the lock plate (C8),
a washer, a spring washer and a nut on
the cylinder of the lock.
