OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
17
ZI-EWB500-AKKU
3.
Battery box assembly: Connect the
battery box onto the tray by using 4
times (srew, nut and 2 washers).
4.
Assembly tray onto frame: Connect
the tray with five screws, nuts and
washers onto the frame.
5.
Assembly grip handle: Put the motor
control element onto the handle and fix
it with a screw.
6.
Connecting the cable: Connect the 6-
prong plug @ Position 1, 5-prong plug
@Position 2, 3-prong plug @Position 3.
The control cable (6 prong plug) should
be carried through the frame and the
cable should be fixated with cable ties
onto the frame.
13
OPERATION
Device to be operated in a perfect state only. Inspect the device visually every time it is to be used.
Check in particular the safety equipment, electrical controls, electric cables and screwed connection for
damage and if tightened properly. Replace any damaged parts before operating the device.
13.1
Operation instructions
W A R N I N G
Unplug battery before all maintenance and settings!
N O T I C E
Never remove the battery while the machine is running
In case of longer standstill, press the shut-down button
Use the electric motor only with sufficient battery charge
1
2
3
