ZIPPER MASCHINEN ZI-CRM40V-AKKU, User Manual

Page: 25 / 37

MAINTENANCE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  25
ZI-CRM40V-AKKU
14 MAINTENANCE
WARNING
Unplug battery and safety switch (if equipped) before all maintenance and
settings!
Serious injury due to unintentional or automatic activation of the machine!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
NOTICE
Clean your machine regularly after every usage – it prolongs the machines lifespan and
is a pre-requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
Store the machine in a closed, dry location
14.1 Changing cutting tool
CAUTION
Always wear protective gloves while working on the cutting tool. Risk of
injurie !
 Loosen the blade nut by
turning it counterclockwise
 Remove the blade nut,
spacer, blade insulator
and blade
 Replace the blade
insulator and spacer, then
thread the blade nut on
the shaft and tighten