TRANSPORT
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
30
ZI-RPE125
30
17.5.4
Checking the clutch
Check the clutch at the same time as the V-belt. With the belt removed, visually check the
outside for seizure and the "V" groove for wear and damage. Clean the V-groove as required.
If the clutch shoe is worn, the power transmission becomes insufficient.
Cleaning the spark plug
1.
Pull out the spark plug cap and remove impurities from the outside of the spark plug.
2.
Unscrew the spark plug using the spark plug wrench.
3.
Check the ceramic insulation, clean the electrodes (metal tips) and check the distance
between the contacts. It should be 0.7 to 0.8 mm.
4.
Reinstall the cleaned (or replaced) spark plug and replace the spark plug cap.
18
TRANSPORT
W A R N I N G
Never lift or transport the machine with the engine running!
Transport over shorter distances
For transport over short distances, use the hand holder and the mounted transport wheels.
Lifting and transporting with separate devices
N O T I C E
There are two persons required to lift and park the machine on another transporting devices.
- one person to operate the hoist and one person to keep the machine in balance.
1.
When transporting over long distances, fold the handle forward as far as possible.
2.
Ensure that the lifting equipment, incl. accessories, is suitable for loads greater than 130 kg.
3.
Before lifting, check the weld on the lifting ring and the fixing of the lifting frame.
4.
First lift the machine only a few centimetres to check the load capacity.
5.
Then lift the machine as gently as possible into the desired position.
6.
Secure the load properly for transport.
19
STORAGE
If the machine is not used for a longer period of time (>30 days):
1.
Empty the oil tanks or fuel tank.
2.
Remove the spark plug and pour a few drops of engine oil into the cylinder. Using a
rope starter, turn the engine a few times so that the oil is well distributed inside the
cylinder. Clean the spark plug and replace it.
3.
Cover the cooled machine and store it out of the reach of children and unauthorised
persons in a well-ventilated, dry and frost-free environment.
20
RECYCLING
Do not dispose of your machine in residual waste. Contact your local authorities for
information on available disposal options. If you buy a new vibratory plate or equivalent
from your dealer, he is obliged in certain countries to dispose of your old machine properly.
