MAINTENANCE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
19
ZI-COM2-8
13
MAINTENANCE
ATTENTION
Bevor maintenance:
Switch off and disconnect from the power supply!
Let cool down the air compressor!
The machine does not require intense maintenance. However, to ensure a long lifespan, we strongly
recommend following the upkeep and maintenance plan.
Repairs must be carried out by specialists! Use original ZIPPER parts only!
NOTICE
Only a properly maintained equipment may be a satisfactory tool. Care and maintenance deficiencies
can cause unpredictable accidents and injuries.
Repairs should be performed only by authorized service centers.
Improper operation may damage the equipment or endanger your safety.
13.1
Cleaning
Keep the safety devices free of dirt and dust as far as possible. Wipe the machine with a clean cloth or
blow it with compressed air at low pressure.
NOTICE
Do not use cleaning agents or solvents; these could attack the plastic parts of the
machine!
13.2
Maintenance plan
Controls for the maintenance of the machine
Loose or lost screws, nuts, bolts
Regularly prior to each operation
Damage of any part of the machine
Regularly prior to each operation
Machine cleaning
Regularly after operation
13.2.1
Storage
If the machine is stored for longer than 30 days:
•
Let the machine cool down
•
Clean the machine and dry
•
Store in a dry, out of reach of children place, well packaged (protection against cuts)
13.3
Disposal
Do not dispose the machine, machine components fuel and oil in residual waste. Contact
your local authorities for information regarding the available disposal options. When you buy
at your local dealer for a replacement unit, the latter is obliged to exchange your old.
