ZIPPER MASCHINEN 9120039232737, User Manual

Page: 33 / 78

TROUBLE SHOOTING
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  33
ZI-KS210
16 TROUBLE SHOOTING
BEFORE YOU START WORKING FOR THE ELIMINATION OF DEFECTS, DISCONNECT THE
MACHINE FROM THE POWER SUPPLY.
Trouble Possible cause Solution
Engine doesn’t run
(or not correctly)  Switch defective  Repair switch
 Power supply is off  Repair power supply
 Carbon brushes defective  Chang carbon brushes
 Motor defective  Repair or change motor
Saw blade gets stucked  Blunt saw blade  Sharpening or changing
 Too hard materal or too
much pressure
 Conform the cutting
speed on work piece
hardness and engine
power
Material kickback  Blunt saw blade  Sharpening or changing
 Wrong running direction
of the saw blade
 Control
Wrong cutting angle
Wrong mitre angle  Wrong adjusted fence or
saw aggregate
 Control
Saw blade touches the
machine bed
 Adjusting the cutting
depth wrong
 Control
MANY POTENTIAL SOURCES OF ERROR CAN BE CLEARED BY THE EXPERTLY CONNECTION TO
THE ELECTRICITY GRID.
N O T I C E
Should you in necessary repairs not able to properly to perform or you have not
the prescribed training for it always attract a workshop to fix the problem.