SAFETY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
18
ZI-BHA1500D
Prohibited use
The operation of the machine outside the stated technical limits described in this manual is forbidden.
The use of the machine not according with the required dimensions is forbidden.
The use of the machine not being suitable for the use of the machine and not being certified is forbidden.
Any manipulation of the machine and parts is forbidden.
The use of the machine for any purposes other than described in this manual is forbidden.
The unattended operation on the machine during the working process is forbidden!
It is not allowed to leave the immediate work area during the work is being performed.
11.2
Security instructions
Missing or non-readable security stickers have to be replaced immediately!
The locally applicable laws and regulations may specify the minimum age of the operator and limit
the use of this machine!
To avoid malfunction, machine defects and injuries, read the following security instructions!
Keep your work area dry and tidy! An untidy work area may cause accidents. Avoid slippery
floor.
Make sure the work area is lighted sufficiently
Do not overload the machine
Provide good stability and keep balance all times
Avoid abnormal working postures! Make sure you stand squarely and keep balance at all
times.
Keep away from the running drill!
Always stay focused when working. Reduce distortion sources in your working environment.
The operation of the machine when being tired, as well as under the influence of alcohol,
drugs or concentration influencing medicaments is forbidden.
Respectively trained people only and only one person shall operate the machine.
Do not allow other people, particularly children, to touch the machine or the cable. Keep them
away from your work area.
Make your workshop childproof.
Make sure there is nobody present in the dangerous area. The minimum safety distance is 2m
Wear suitable work clothes! Do not wear loose clothing or jewellery as they might get caught
in moving parts and cause severe accidents! Wear a hair net if you have long hair.
Use personal safety equipment: safety gloves, dust musk, ear protectors and safety goggles
when working with the machine.
Never leave the machine running unattended! Before leaving the working area switch the
machine off and wait until the machine stops.
Always disconnect the machine prior to any actions performed at the machine.
Avoid unintentional starting
Do not use the machine with damaged switch
The plug of an electrical tool must strictly correspond to the socket. Do not use any adapters
together with earthed electric tools
Each time you work with an electrically operated machine, caution is advised! There is a risk
of electric shock, fire, cutting injury;
Protect the machine from dampness (causing a short circuit)
Use power tools and machines never in the vicinity of flammable liquids and gases (danger of
explosion)
Check the cable regularly for damage
When working with the machine outdoors, use extension cables suitable for outdoor use
Do not use the cable to carry the machine or to fix the work piece
Protect the cable from heat, oil and sharp edges
Avoid body contact with earthed
Before starting the machine remove any adjusting wrenches and screwdrivers
Rotating parts can cause severe cut injuries
Keep the drills sharp and clean, so they get stuck less often and are easier to guide
Keep any machine that is not being used out of reach of children
