Def.
3
Valid Values
1~127
Description
In the normal mode, after the PIR motion detected, setting the re-detect
time. 8 seconds per tick, default tick is 3 (24 seconds). Setting the suitable
value to prevent received the trigger signal too
frequently. Also can save the battery energy.
Notice: If this value bigger than the
confi guration setting NO. 9. There is a
period after the light turned off and the PIR not start detecting.
NO.
9
Name
Turn Off Light Time
Def.
4
Valid Values
0~127
Description
After turn on the lighting, setting the
delay time to turn off the lighting when the PIR motion is not detected. 8
seconds per tick, default tick is 4 (32 seconds).
0 means never send turn off light command.
NO.
10
Name
Auto Report Battery Time
Def.
12
Valid Values
All
Description
Customer function switch, using bit control.
Def.
0
Valid Values
All
Description
Bit1: Enable sending motion OFF report. (0:Disable, 1:Enable)
Note: Depends on the Bit4, 0: Report Notifi cation CC, Type: 0x07, Event:
0xFE
1: Sensor Binary Report, Type: 0x0C, Value: 0x00
Def.
1
Valid Values
All
Description
Bit2: Enable PIR super sensitivity mode. (0:Disable, 1:Enable)
Def.
0
Valid Values
All
Description
Bit3: Disable send out BASIC OFF after door closed. (1:Disable,
0:Enable)
Bit4: Notifi cation Type,
0: Using Notifi cation Report. 1: Using Sensor Binary Report. Bit5: Disable
Multi CC in auto report. (1:Disable, 0:Enable) Bit6: Disable to report battery
state when the device triggered. (1:Disable, 0:Enable)
NO.
8
Name
PIR Re-Detect Interval Time
NO.
13
Name
Auto Report Temperature Time
Def.
12
Valid Values
0 ~ 0xFF
Description
The interval time for auto report the temperature.
0 means turn off auto report temperature.
The default value is 12. The tick time can setting by the confi guration No.20.
NO.
20
Name
Auto Report Tick Interval
Def.
30
Valid Values
0 ~ 0xFF
Description
The interval time for auto report each tick. Setting this confi guration will
effect confi guration No.10, No.11, No.12 and No.13. Caution: Setting to 0
means turn off all auto report function.
NO.
21
Name
Temperature Differential Report
Def.
1
WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED
IN DURATION TO THE LIMITED WARRANTY PERIOD. TO
THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES
IN THIS WARRANTY STATEMENT ARE CUSTOMER’S SOLE
AND EXCLUSIVE REMEDIES AGAINST ZIPATO. THEY DO
NOT, HOWEVER, AFFECT OR RESTRICT THE RIGHTS YOU
HAVE AGAINST THE BUSINESS YOU BOUGHT A ZIPATO
PRODUCT FROM. IN NO EVENT WILL ZIPATO BE LIABLE FOR
LOSS OF DATA OR FOR INDIRECT, SPECIAL, INCIDENTAL,
CONSEQUENTIAL (INCLUDING LOST PROFIT OR DATA), OR
OTHER DAMAGE, WHETHER BASED IN CONTRACT, TORT,
OR OTHERWISE. HOWEVER, NOTHING IN THIS AGREEMENT
LIMITS ZIPATO’S LIABILITY TO YOU (I) IN THE EVENT OF DEATH
OR PERSONAL INJURY TO THE EXTENT RESULTING FROM
ZIPATO’S NEGLIGENCE, OR (II) TO THE EXTENT RESULTING
FROM ANY FRAUDULENT MISREPRESENTATION ON THE
PART OF ZIPATO, OR (III) TO THE EXTENT ARISING UNDER
PART 1 OF THE CONSUMER PROTECTION ACT 1987 OF THE
UNITED KINGDOM. SOME STATES OR COUNTRIES DO NOT
ALLOW: (1) A DISCLAIMER OF IMPLIED WARRANTIES; (2) A
LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS
OR THE EXCLUSION; OR (3) LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS.
IN SUCH STATES OR COUNTRIES, SOME EXCLUSIONS OR
LIMITATIONS OF THIS LIMITED WARRANTY MAY NOT APPLY
TO YOU. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT MAY VARY
FROM STATE TO STATE OR FROM COUNTRY TO COUNTRY. YOU
ARE ADVISED TO CONSULT APPLICABLE STATE OR COUNTRY
LAWS FOR A FULL DETERMINATION OF YOUR RIGHTS.
This Limited Product Warranty applies to ZIPATO branded
hardware products (collectively referred to as “ZIPATO Hardware
Products”) sold by ZIPATO (Europe), its European subsidiaries,
affi liates, authorized resellers, or country distributors (collectively
referred to as “ZIPATO Resellers”) with this Limited Product
Warranty.
The term “ZIPATO Hardware Product” is limited to the
hardware components and all its internal components
including fi rmware.
The term “ZIPATO Hardware Product” DOES NOT include any
software applications or programs.
The device supports the Z-Wave fi rmware update via OTA.
Before starting the procedure, please remove the front cover
of the device. Otherwise the hardware check will fail. Let the
controller into the fi rmware update mode, and then press the
front tamper key once to start the update. After completing the
fi rmware download, LED will start fl ashing every 0.5 second.
During this time, please don’t remove the battery, otherwise
it will cause the fi rmware failure, and the device will stop
functioning. After LED stops fl ashing, it is recommended that
user powers up the device. Caution: After battery removal,
please wait about 30 seconds, and then re-install the battery.
TROUBLESHOOTING
Having trouble installing your new product?
Zipato’s website contains the latest user documentation and
software updates for Zipato products and services:
www.zipato.com
You can also fi nd answers in the Zipato Community at:
community.zipato.com
Zipato Support:
LIMITED PRODUCT WARRANT
GENERAL TERMS
Nothing in this Limited Product Warranty affects your statutory
rights as a consumer.
The Limited Product Warranty set forth below is given by Tri
plus grupa d.o.o. (Europe) (herein referred to as “ZIPATO”). This
Limited Product Warranty is only effective upon presentation
of the proof of purchase. Upon further request by ZIPATO, this
warranty card has to be presented, too.
EXCEPT AS EXPRESSLY SET FORTH IN THIS LIMITED
WARRANTY, ZIPATO MAKES NO OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. ZIPATO EXPRESSLY DISCLAIMS ALL WARRANTIES
NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED
purchase date. You may be required to provide proof of purchase
as a condition of receiving warranty service. You are entitled
to warranty service according to the terms and conditions of
this document if a repair to your ZIPATO branded hardware is
required within the Limited Product Warranty Period.
[Other than in respect of products for domestic use (in
particular those listed in the fi rst and last boxes in the table
below), this Limited Product Warranty extends only to the
original end user purchaser of this ZIPATO Hardware Product
and is not transferable to anyone who obtains ownership of
the ZIPATO Hardware Product from the original end-user
purchaser.
PRODUCT WARRANTY PERIOD TABLE
PRODUCT TYPE
Multisensor Quad
PRODUCT WARRANTY PERIOD
One (1) year
IMPORTANT
The content of “Product Type” listed above is subject to change;
please refer to the
www.zipato.com
for latest update.
PERFORMANCE OF THE LIMITED PRODUCT
WARRANTY
If a product defect occurs, ZIPATO’s sole obligation shall be
to repair or replace any defective Zipato Hardware Product
free of charge provided it is returned to an Authorized ZIPATO
Service Centre during the Limited Warranty Period. Such repair
or replacement will be rendered by ZIPATO at an Authorized
ZIPATO Service Centre. All component parts or hardware
products that are replaced under this Limited Product Warranty
become the property of ZIPATO. The replacement part or
product takes on the remaining Limited Warranty Period of the
replaced part or product. The replacement product need not be
new or of an identical make, model or part; ZIPATO may in its
discretion replace the defective product (or any part thereof)
with any reconditioned equivalent (or superior) product in all
material respects to the defective product.
WARRANTOR
0~127
Description
The interval time for auto report the battery level. 0 means turn off auto
report battery.
The default value is 12. The tick time can setting by the confi guration No.20.
NO.
11
Name
Auto Report Door/Window State Time
Def.
12
Valid Values
1~127
Description
The interval time for auto report the door/window state. 0 means turn off
auto report
door/window state. The default value is 12. The tick time can setting by the
confi guration No.20.
NO.
12
Name
Auto Report Illumination Time
Def.
12
Valid Values
1~127
Description
The interval time for auto report the illumination. 0 means turn off auto
report illumination. The default value is 12. The tick time can setting by the
confi guration No.20.
Valid Values
0 ~ 0x7F
Description
The temperature differential to report.
0 means turn off this function. The unit is Fahrenheit. Enable this function
the device will detect every minutes.
And when the temperature is over 140 degree Fahrenheit, it will continue
report.
Enable this functionality will cause some issue please see the detail in the
“Temperature Report” section.
NO.
22
Name
Illumination Differential Report
Def.
0
Valid Values
0 ~ 0x63
Description
The illumination differential to report.
0 means turn off this function. The unit is percentage. Enable this function
the device will detect every minutes.
Enable this functionality will cause some issue please see the detail in the
“Illumination Report” section.
WAVE COMMAND CLASSES
COMMAND_CLASS_CONFIGURATION
COMMAND_CLASS_VERSION
COMMAND_CLASS_SENSOR_BINARY_V2
COMMAND_CLASS_ASSOCIATION_V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
COMMAND_CLASS_WAKE_UP_V2
COMMAND_CLASS_SENSOR_MULTILEVEL_V5
COMMAND_CLASS_BATTERY
COMMAND_CLASS_BASIC
OVER THE AIR FIRMWARE UPDATE
GEOGRAPHICAL SCOPE OF THE LIMITED
PRODUCT WARRANTY
This Limited Product Warranty is applicable to Hardware
Products sold by Zipato Resellers in all countries listed at the
beginning of this document under the heading “Countries in
which this ZIPATO Limited Product Warranty applies”. The
Limited Product Warranty will be honored in any country where
ZIPATO or its authorized service providers offer warranty service
subject to the terms and conditions set forth in this Limited
Product Warranty. However, warranty service availability and
response times may vary from country to country and may also
be subject to registration requirements.
LIMITATION OF PRODUCT WARRANTY
ZIPATO warrants that the products described below under
normal use are free from material defects in materials and
workmanship during the Limited Product Warranty Period set
forth below (“Limited Product Warranty Period”), if the product
is used and serviced in accordance with the user manual and
other documentation provided to the purchaser at the time of
purchase (or as amended from time to time).
ZIPATO does not warrant that the products will operate
uninterrupted or error-free or that all defi ciencies, errors,
defects or non-conformities will be corrected.
This warranty shall not apply to problems resulting from: (a)
unauthorized alterations or attachments; (b) negligence,
abuse or misuse, including failure to operate the product in
accordance with specifi cations or interface requirements; (c)
improper handling; (d) failure of goods or services not obtained
from ZIPATO or not subject to a then-effective ZIPATO warranty
or maintenance agreement; (e) improper use or storage; or
(f) fi re, water, acts of God or other catastrophic events. This
warranty shall also not apply to any particular product if any
ZIPATO serial number has been removed or defaced in any way.
ZIPATO IS NOT RESPONSIBLE FOR DAMAGE THAT OCCURS AS
A RESULT OF YOUR FAILURE TO FOLLOW THE INSTRUCTIONS
FOR THE ZIPATO HARDWARE PRODUCT.
LIMITED PRODUCT WARRANTY PERIOD
The Limited Product Warranty Period starts on the date of
purchase from ZIPATO. Your dated sales or delivery receipt,
showing the date of purchase of the product, is your proof of the
19
20
21
22
23
24
25
26
27
