© 2021 System Q Ltd
Rapid Deploy Manual
6
3
Powering & Charging
Before attempting
ensure the Rapid Deploy Camera has the battery inserted fully
and has been charged.
Status LED:-
Red = Charging
Green = Charged (and plugged in)
No Light = Not Charging
Micro (B) USB charger is required for the charging and powering of the Rapid Deploy
Batteries.
Micro (B) USB charger and lead are not supplied.
4
Setup Considerations
Before attempting Setup ensure the Rapid Deploy Camera has the battery inserted fully
and has been
.
The receiver needs to be
via USB to the recorder before
.
The firmware required for the DVR and NVR is version 8 onwards.
4.1 POE NVR Channel Setup
For PoE ZIP NVRs, the channel configuration for IP Channels need altering before setting
up the USB wireless channels.
Go to the menu of the DVR
Video > IP Channels
Switch Mode >
Set to
Manual Mode
6
6
3
9