Zip HydroTap BC100/75 Operating Instructions Manual Download Page 32

Page 32 of 32 

802411US v1.27 06.21 BC, BC100-75 Install Instructions

Manufactured by: Zip Water (Aust) Pty Ltd

67 Allingham Street, Condell Park NSW 2200 Australia

Distributed in US and Canada by: Culligan International Company

9399 West Higgins Road, Suite 1100, Rosemont, IL 60018

www.us.zipwater.com

Call US Toll Free 1-833-233-2358 for assistance, service, spare parts or enquiries.

As Zip policy is one of continuous product improvement, changes to specifications may be made 

without prior notice. Images in this booklet have been modified and may not be true representations of 

the finished goods.

The terms “Zip” and “HydroTap” are registered trade marks of Zip Water (Aust) Pty Ltd. 

BC – Classic XX, BC – ARC XX, BC – CUBE XX, BC100/75 – Classic XX, BC100/75 – CUBE XX and 

BC100/75 – ARC XX have been tested and certified by WQA against NSF/ANSI Standard 372 for low 

lead requirement, against NSF/ANSI Standard 42 and NSF/ANSI Standard 53. This will deliver the re-

quired bacteriostatic effect and the reduction of aesthetic chlorine, taste, odor, nominal particulate Class 

I (≥ 0.5 µm to < 1 µm), cyst and lead as verified and substantiated by test data. See Performance Data 

Sheets for specific performance claims. Certified performance claims are only valid when filter cartridge 

1Z-LS (Culligan Part Number 01034276) is used.

BC - Classic XX, BC – ARC XX, BC - CUBE XX, BC - Wave XX, BC100/75 - Classic XX, BC100/75 - 

CUBE XX and BC100/75 - ARC XX have been certified by IAPMO R&T against NSF/ANSI Standard 

372 for low lead requirement, NSF/ANSI Standard 42, NSF/ANSI Standard 53, CSA B483.1, ASSE 

1023, and ASSE 1087. This will deliver the required bacteriostatic effect and the reduction of aesthetic 

chlorine, taste, odor, nominal particulate Class I (≥ 0.5 μm to < 1 μm), cyst and lead as verified and 

substantiated by test data. See Performance Data Sheets for specific performance claims. Certified 

performance claims are only valid when filter cartridge 1Z-LS (Culligan Part Number 01034276) is used. 

© 2021 Zip Water (Aust) Pty Ltd

Summary of Contents for HydroTap BC100/75

































Reviews: