Zip Econoboil - Installation & Operating Instructions - 81441 - July 2015 v1.03
Page 9 of 16
Manual Override:
Override function interrupts the ON/OFF status of the timer.
Two override period options (1 hour and 2 hours) are available. Press OVER-
RIDE button once to select 1 hour override and “1hr” will be displayed on the
screen.(See Fig.6 alongside). Press OVERRIDE button again within 2 seconds to
increase the override time to 2 hours and “2hr” will be displayed on the screen.
The override hour can be altered between 1 and 2 hours by pressing OVERRIDE
button.
Override function operates differently in ON, OFF and AUTO mode. Check the
position of the bar cursor to identify the current program mode before override.
Reverse Override - when the timer is in ON or OFF status
The ON/OFF status will be reversed if the timer is in ON or OFF mode.
•
When the timer is in OFF mode*
Once the OVERRIDE button is pressed, the timer will change to the “ON” status.
The symbol
will be displayed on the screen. This will switch the unit on
during the override period. While the override hour is in operation, a countdown
clock will appear on the LCD screen. (See Fig.e). At the end of the override
period, the timer will revert back to OFF mode.
•
When the timer is in ON mode
Once the OVERRIDE button is pressed, the timer will change to the “OFF” sta-
tus. This will switch the unit off during the override period. While the override
hour is in operation, a countdown clock will appear on the LCD screen. (See
Fig.7). At the end of the override period, the timer will revert back to the “ON”
mode.
Temporarily ON Override - when the timer is in AUTO mode
Timer will be turned on for the desired override period if the timer is in AUTO
mode.
•
When the preset program mode is in OFF period*
Once the OVERRIDE button is pressed, the timer will change to the “ON” status.
While the override hour is in operation, a countdown clock will appear on the
LCD screen. The unit will be running in ON mode for set override period. At the
end of the override period the program will revert back to the preset program
mode.
•
When the preset program mode is in ON period
The override period will only start when the programmed ON period is complet-
ed. While the override hour is in operation, a countdown clock will appear on
the LCD screen. At the end of the override period the program will revert back
to the preset program mode.
NB:
To cancel the override mode, press either the “SEL” or “OVERRIDE” button
anytime during the override period.
* This feature complies with the BCA (Building Code of Australia), Section J6.
59
Sa
Countdown clock
Fig.f
Operating procedure
Fig.e
Sa
1 hour override
1
8
:
0
0
hr
1
hr
