background image

802701UK - Celsius Comm User Guide - Jan 2016 - V2.02 

 

Page 11 of 20

  E.  Security

The Zip HydroTap

®

G4 allows the appliance coordinator to set up a password 

to protect against users changing the preferred system settings.  

To set a password

• 

Press the [MENU] button for main 

menu.

• 

Press the [Security] button.

• 

Press [Enable Password]. 

• 

Enter a 4 digit password.

• 

Press [Enter].

3.  

    

LCD Screen operation - Section E

To change a password

• 

Press the [MENU] button for main 

menu.

• 

Press the [Security] button.

• 

Press [Change Password]. 

• 

Enter your old 4 digit password.

• 

Then enter your new 4 digit 

password & press [Enter]. (Once 

the password has been set you 

will need to enter the password 

to access the settings screen. If 

you have forgotten the password, 

please disconnect the power and 

restart your HydroTap

®

G4). 

Settings screen

  F.  Communication (when available)

The Zip HydroTap

®

G4 allows the user to use Wi-Fi or Bluetooth to operate 

the product remotely. 

Not yet available

LCD Screen operation - Section F

Summary of Contents for Celsius HydroTap G4 range





















Reviews: