Zip 82232 Installation And Operating Instructions Manual Download Page 5

Zip Filter Tap - Installation & Operating Instructions - 82232 - January 2012 v1.01 

Page 5 of 8

 

Filter Replacement

Not changing cartridges when required may cause the water to become biologically 
unsafe.

Thoroughly flush the water through, if the filter tap has not been used for more 
than 12 hours. For safe operation, the filter cartridge should be replaced at least 
every 6-12 months, or earlier if you notice a persistent reduction in water pressure 
from the Filter Tap, or an unpleasant taste or odour in the water.

Use only a Zip filter cartridge to match that of your Filter Tap. Replacement 
cartridges can be obtained through plumbing suppliers or directly from Zip.

Replacing a Zip Filtration cartridge is as easy as 1-2-3.

1. 

Unplug the old cartridge 

2. 

Plug in the new cartridge.

3. 

Purge the filter system by flipping the Filter Tap lever open (on) for a few  

 

minutes until the water runs clear.

High sediment water areas.

Zip Filter Tap 59087 is a single filter system suitable for areas in which water supply sediment is not a problem. In areas 
with heavy sediment contamination, add the Zip Pre-Filter model 51000 with an additional filter housing 50001, for extra 
sediment removal.

Operating

You can obtain filtered water within the rated capacity for as long as you rotate the lever. 
In the upright position the tap is off, when the lever is rotated anticlockwise water will 
flow. Water will continue to flow until the lever is returned to the upright position.

Cleaning

Never use strong, corrosive or abrasive cleaning materials on the Zip Filter Tap. Wipe the 
outer surfaces clean with a sponge or a soft cloth using a mild soap and water.

Operating Procedures

ROTATE

Service 

There are no user serviceable parts but there are dangerous voltages present within the unit. All service work must only 
be carried out by a suitably qualified and experienced service person.

Before calling for service, check that both the water and electricity supplies are turned ‘ON’ and OK.

Call an electrican, a plumber, or Zip for a free call in Australia on 
1800-638-633 for assistance, service, spare parts or enquiries.

Service

Summary of Contents for 82232









Reviews: