804546 03.17 1.00
Page 15 of 24
After installing a new
fi
lter, touch
[Flush Filter]
to enter the
fl
ush sequence (refer to the Filter Flush
diagram on page 8).
Set the valve on the side of the unit to the “Filter
Flush” position (
fi
g.2 on page 8) and touch
[Next]
It is important for the valve to be in the “Filter
Flush” position to prevent water entering the boil-
ing tank. Touch “Start” and allow 5 litres of water
to
fl
ow through the
fi
lter (this takes about 10min of
fl
ushing). Water must trickle out of the vent outlet
(at 0.5L/min). Touch “Stop” when complete.
Touch
[Next] after
fl
ushing.
As prompted, return the
fi
lter valve to the “Filtered”
position (Fig.2 on page 8) and then touch
[Done].
Touch
[Done] after
fl
ushing is completed.
Menu Operation
Press
[Continue] to reset the filter counter.
2.4.3 SETTINGS - FILTER LOG
From the home screen touch
,
,
[Filter
Log].
This is a record of when the
fi
lter was changed.
3 INSTALL MENU
From the home screen touch
,
,
[Install].
3.1 INSTALL – LIGHT CALIBRATION
This action adjusts the darkness threshold.
Light calibration is performed at normal (daylight)
light level. A suitable darkness threshold is cal-
culated and stored for night time low power mode
(sleep mode).
From home screen touch
,
,
, [Light Cali-
bration].
