Drill slowly so you won't crack the pipe.
The holes on each end of the pipe have to be drilled parallel to each other. If they are 90
degrees off, you won't be able to attach the end of the strut to the center ring. Try to drill
through the lettering on the outside of the pipe, that will help you line up the holes on
each end of the strut so they are parallel to each other.
Mark the pipe with Blue, Red, or Yellow colored tape to help you distinguish them
during setup.
Page 17 of 35
Zip Tie Domes 1857 Brindley Hollow Road, Buffalo Valley, TN 38548 USA
