Page 24 of 28 802006UK BCS Residential User Guide - Aug 2015- V2.01
To allow the safety setting to be changed using the
touch screen
(Classic and Elite)
• Press the [MENU] button
for main menu.
• Press the [Setting] button.
• Press the [Safety] button.
• Press button to allow the
safety setting to be changed.
To enable or disable the
safety lock on the tap
•
Press button to select [Enable] / [Disable].
Note
Upon completion all the settings can be protected by dis-allowing any
setting changes by selecting [NO] on the safety settings screen.
Safety
LCD Screen operation - section G
A
B
C
A
B
To activate the hot isolation
(Classic and Elite)
The HydroTap
®
G4 is equipped with a safety mode that allows for additional
safety protection, if needed.
Hot isolation
(do not enable with Arc / Cube)
To allow safety changes, select [YES] on the safety settings screen.
• To activate, press button to disable safety lock feature. Then press
button to enable hot isolation.
• To de-activate, press button to disable hot isolation. Then press button
to enable / disable the safety lock.
• To operate the tap when in hot isolation mode, touch the safety lock three
times rapidly, the LEDs will flash. This operation confirms de-activation
and will remain de-activated for 30 seconds. The hot isolation can be
immediately set again, by touching the safety lock three times rapidly
or after 30 seconds of non use the unit will revert to hot isolation active
mode.
B
B
C
C