11
Check before each use
Check the sandblaster previous to each use for damaged and/or deformed parts. Check all hoses for
wear and tear and check if the nozzle is not too worn. In case of a malfunction/defect, do not use the
sandblaster until it has been repaired.
Possible problems and causes
1.
Check the nozzle every 10-12 hours, in case it is worn unevenly, turn it ¼ stroke every 10
hours.
2.
In case the grit is clotting, this means there is moisture in the compressed air or there is
moisture/oil in the system. This leads to clogging and an uneven spray. Always place an air
unit/air dryer in the system. It could also be that there is too much debris in the grit, this can
be solved by filtering/replacing the grit.
ADVICE: The diameter of the air hose should be at least ½“.
6.
Specifications
Model
SK10B
Tank volume
40L
Min. work pressure
4bar
Max. work pressure
8,6bar
Air consumption
Ca. 350 L/min
Weight
13kg
7.
Warranty
1.
The warranty enters into force on the date that is mentioned on the receipt and has a validity
of twelve months.
2.
The warranty is not transferable without written permission of your distributor.
3.
Warranty cannot be claimed without a receipt.
4.
Warranty only applies when the product is used according to the included manual and is
used exclusively in the way it was designed for.
5.
No changes can be made to the product.
6.
The warranty does not apply in case of injudicious use.
7.
Possible shipping costs are not covered by the warranty.
8.
Repairs should exclusively be carried out by your supplier. Repair(s) carried out by others will
result in cancellation of the warranty.
9.
Repairs that are carried out during the warranty period will not extend the validity of the
warranty. There will be given a warranty of three months on the repair itself in case the
regular warranty should expire.
10.
Potential maintenance of the product,
as described in the user manual, should be carried out
on time.
11.
For the warranty U can only turn to the outlet where U bought the product.
