22
23
22
23
S u b i t o C o t t o M i n i
U s e r a n d M a i n t e n a n c e M a n u a l
U s e r a n d M a i n t e n a n c e M a n u a l
S u b i t o C o t t o M i n i
Precautions
NEVER move the oven when it is hot.
All products are manufactured and verified by TEK REF S.r.l. before being shipped and delivered to the customer.
When used correctly, the oven is designed, manufactured and tested to meet all specific standards (see declaration of
compliance).
Choosing an area for use
The Subito Cotto MINI oven can be used both indoors and outdoors. For internal use, the room must be properly ventilated. For
outside use, choose an area that is not windy. The Subito Cotto MINI is made of materials resistant to atmospheric agents, but
during periods of non-use, it is recommended you cover it up.
• Place the oven on a horizontal surface sturdy enough to support its weight
• Place the oven somewhere far away from any combustible material.
• Ambient temperature: from -20 °
C (68 °F)
to
+50
°
C
(122
°F)
;
• Humidity: ≤ 90% without condensation;
• Atmospheric pressure: 86 kPa ~ 106 kPa
• Keep the oven away from external heat sources, open flames and atmospheric agents.
W A R N I N G
IMPROPER PLACEMENT AND/OR MAINTENANCE OF THE OVEN WILL INVALIDATE THE TERMS
OF WARRANTY.
P L A C E M E N T
Configuration
The Subito Cotto MINI is configured for standard for use with LPG gas. It can be
configured for methane gas on request and before purchase. A low pressure
regulator must be used to connect the Subito Cotto MINI to the LPG cylinder. This
regulator must have the following indicators:
• Flow rate: 7 kg / h
• LOW Pressure: 30 mbar
Connect the gas tube by screwing on the nut with the left threading into the
appropriate coupling under the oven. Use a suitable seal and tubing that complies
with regulations.
First Ignition
• Please take utmost care when igniting the oven for the first time - the flame
should be kept very low, not exceeding 100/120 °
C (212/248 °F)
.
• The duration of each ignition should be increased day after day, so as to
obtain a gradual increase in temperature, for a period of five or six days
or until the water contained in the oven is totally evaporated and until the
oven reaches 420/450
°C (788/842 °F)
.
The first few ignitions remove the moisture from the oven that was accumulated during production and transport. Switch the
Subito Cotto MINI on for the first time for at least three hours, this pre-heating phase is very important.
WATER LEAKAGE ON FIRST IGNITION IS COMMON AND DOES NOT INDICATE A DEFECTIVE PRODUCT
Note: Due to thermal expansion, small cracks may appear in the dome or hearth during polymerizations. This is normal and also
does not indicate a defective product.
W A R N I N G
QUICK IGNITION WITH A RAPID INCREASE IN TEMPERATURE CAN LEAD TO SEVERE DAMAGE TO
THE COOKTOP, RAISING WEDGES IN THE BASE AND/OR BREAKAGE OR DISPLACEMENT OF THIS
BASE.
