PA G E 6
I N S T R U C T I O N M A N U A L
K M S - F 1
OTHER APPROVED FOXTEL MULTISTACKER PRODUCTS
FROM KINGRAY
Description
Part No.
IPL
2 Way Splitter
KSP2F
F30950
3 Way Splitter
KSP3F
F30951
4 Way Splitter
KSP4F
F30952
FTA/SAT Diplexer
KDPTSF
F30953
4 Way 12dB Tap
KT412F
F30954
4 Way 15dB Tap
KT415F
F30955
4 Way 20dB Tap
KT420F
F30956
F Type Wall Plate
KWP11F
F30923
Single Input 25dB Amplifier
SAT25S
F30948
Single Input 40dB Amplifier
SAT40S
F30949
SAFETY WARNING
1. Indoor Use Only
To avoid the risk of fire or electric shock, do not
expose the receiver to rain or moisture.
Operating temperature : -
20 ºC ~ 60ºC
2. Overheating avoid
To prevent the multistacker from overheating, do
not operate it in an area that exceeds the maximum
recommended temperature of 60 C. To prevent
airflow restriction, allow adequate clearance
around the multistacker.
3. Grounding
This equipment is intended to be grounded in a
commercial application. For further information on
when to ground the installation refer to Section
7.2.5 Earthing & Equipotential Bonding of the
Foxtel’s MDU MRE and Commercial Satellite
Installation Manual FD/T/E/2207.
4. Installation
Only trained and qualified personnel should be
allowed to install, replace or service this equipment.
The installation of the equipment must comply with
FOXTEL’s installation guidelines.
Note: All statements, information and recommendations in this manual are believed to be accurate at the
time of print.
Dip Switches on the multistacker are switched to
match up to the state/territory it is installed in.
ON
1 2 3 4 5
The stacker has been fitted with a 5 position dip switch which is switched to match the State installed. This
allows Foxtel to make better use of Transponder space in the event that the total 32 transponders are used.
