Page 15
Keep the shipping box and fixing block, they are needed for
transporting the
ZiXpress 64 DX system
.
(2)
Connect power cord to the instrument.
(3)
Remove the Fixing Block inside the instrument and place it in
the Fixing Block Sensor Spot, following the guideline below:
1.
Plug in the power cord to the electric outlet
2.
Use a Phillips head screwdriver to release the red
screws
3.
Remove the Fixing Block
4.
Place the Fixing Block in the upper part of the back
of the instrument, in the Fixing Block Sensor Spot.
Without performing this step, the sensor will not
allow the instrument to operate.
2.
3.
Power inlet
Summary of Contents for ZiXpress 64 DX system
Page 17: ...Page 16 4...