While riding your HB1 Hoverboard, if there is a system error or improper
operation performed, the device will prompt the user in a variety of ways.
The following are common occurrences where you will hear the Safety
Alerts. These notices should not be ignored, but appropriate action
should be taken to correct any illegal operation, failure or errors.
• Unsafe riding surfaces (uneven, too steep, unsafe, etc.)
• When you step on the device, if the platform is tilted more than 10
degrees forward or backward.
• Battery voltage is too low.
• The device is still charging.
• During operation, the platform self initiates to tilt due to excess speed.
• Overheating, or motor temperature is too high.
• The device has been rocking back and forth over 30 seconds.
• If the system enters protection mode, the alarm indicator will light up
and the board will vibrate. This typically occurs when the battery is
about to run out of power.
• If the platform is tilted forward or backward more than 15 degrees,
device will power off and stop suddenly, possibly causing the rider to
lose balance or fall off.
• If any or both tyres are blocked, the device will stop after 2 seconds.
• When the battery level has depleted below protection mode, the
device engine will power off and stop after 15 seconds.
• While sustaining a high discharge current during use (such as driving
up a steep slope for a long period of time), the device engine will power
off after 15 seconds.
SAFETY ALERTS
When the HB1 turns off during a Safety Alert, all operation
systems will halt. Do not continue attempting to ride the HB1
when the system initiates a stop. Turn your hoverboard off and
back on to unlock it from a Safety Lock.
WARNING
You will notice the Running Indicator Light will turn RED and you will
hear a beep sound alerting you to take precaution and cease operation,
which may make the hoverboard stop suddenly.
20
