Operation Instructions
8.3 Performing the Treatment
8
Page 12
Note:
All buttons, menus, and sub-menus can be directly activated on the screen with a
touch of your finger.
Select application
programme
Activation of the “
Application
”
button opens the application screen with the
appropriate programme. All relevant application recommendations are pre-set, but
the pulse energy must be individually stepped up for each application.
Place the handpiece /
applicator
Place the handpiece on the selected application field. Note the necessary,
application-specific instructions. In order to avoid friction on the skin, some lotion
should be applied to the application area prior to application.
Caution
!
When using lubricants, the applicator must be covered with the silicone protective
cap.
Setting the pulse energy
Set the pulse energy using the controller on the left side.
Start of treatment
By activating the foot switch, the application starts.
Note:
The shock wave should be activated by the foot after placing the handpiece on the
patient.
End of treatment
By deactivating the foot switch, the application is interrupted or terminated.
Note:
During use, the patient must be monitored carefully, and the application must be
adjusted if necessary or terminated if problems arise.
