8
10 Installation
WARNING
Risk of injury due to uncontrolled movements
Risk of injury in case of unexpected movement of the machine or system into which the product is to be installed.
►
Switch off the energy supply of the machine before any work.
►
Secure the power supply against being switched on unintentionally.
►
Check the machine for any residual energy that may be present.
CAUTION
Risk of injury due to uncontrolled movements
Risk of injury in the event of uncontrolled movement of the product when the power supply is connected.
►
Switch off the power supply to the machine before carrying out any work.
►
Secure the power supply against being switched on unintentionally.
►
Check the machine for any residual energy that may be present.
NOTICE
Non-compliance may result in material damage.
Installation may only be carried out by qualified personnel in accordance with these installation and operating
instructions.
►
Switch off the power supply before any assembly, installation or maintenance work.
Assembly requirements
Permissible unevenness [mm]
Mounting surface length [mm] < 100
0.02
Mounting surface length [mm] > 100
0.05
Strength class (DIN EN ISO 4762)
8.8
INFORMATION
Further installation information:
• The mounting screws are not included in the scope of delivery.
►
Install the product on an appropriate mounting surface in accordance with the flatness specifications.
►
Make sure that the mounting piece is sufficiently rigid.
►
Please note the permitted tightening torques of the mounting screws at
www.zimmer-group.com/de/td
.
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
INSTALLATION AND OPERATION INSTRUCTIONS:
MGH8000
DDOC00279 / a
EN / 2023-02-13
Summary of Contents for MGH8000
Page 2: ......
