background image

4

1  Supporting documents

NOTICE

Read through the installation and operating instructions before installing or working with the product.
The installation and operating instructions contain important notes for your personal safety. They must be read 

and understood by all persons who work with or handle the product during any phase of the product lifetime.
The documents listed below are available for download on our website 

www.zimmer-group.com.

•  Installation and operating instructions
•  Catalogs, drawings, CAD data, performance data
•  Information on accessories
•  Technical data sheets
•  General Terms and Conditions, including warranty information.

 

Ö

Only those documents currently available on the website are valid.

In these installation and operating instructions, "product" refers to the product designation on the title page!

1.1  Notices and graphics in the installation and operating instructions

DANGER

This notice warns of an imminent danger to the life and health of people. Ignoring these notices can lead to 

serious injury or even death.

 

You absolutely must comply with the described measures for avoiding these dangers!

 

Ö

The warning symbols are assigned according to the type of danger.

WARNING

This notice warns of a situation that is potentially hazardous to personal health. Ignoring these notices can cause 

serious injury or damage to health.

 

You absolutely must comply with the described measures for avoiding these dangers!

 

Ö

The warning symbols are assigned according to the type of danger.

CAUTION

This notice warns of a situation that is potentially hazardous for people or that may result in material or environ-

mental damage. Ignoring these notices may result in slight, temporary injuries or damage to the product or to the 

environment.

 

You absolutely must comply with the described measures for avoiding these dangers!

 

Ö

The warning symbols are assigned according to the type of danger.

NOTICE

General notices contain usage tips and valuable information, but no warnings of dangers to health.

INFORMATION

This category contains useful tips for handling the product efficiently. Failure to observe these tips will not result 

in damage to the product. This information does not include any information relevant to health or workplace 

safety.

INSTALLATION AND OPERATING INSTRUCTIONS:

EB5000

DDOC00206 / g

 

EN / 2022-10-01

 

Zimmer GmbH • Im Salmenkopf 5 • 

 77866 Rheinau, Germany • 

 +49 7844 9138 0 • www.zimmer-group.com

Summary of Contents for EB5000 Series





















Reviews: