Zimmer GmbH
•
Im Salmenkopf 5
•
77866 Rheinau, Germany
•
+49 7844 9138 0
•
+49 7844 9138 80
•
www.zimmer-group.com
8
9
Zimmer GmbH
•
Im Salmenkopf 5
•
77866 Rheinau, Germany
•
+49 7844 9138 0
•
+49 7844 9138 80
•
www.zimmer-group.com
INSTALLATION AND OPERATING INSTRUCTIONS:
Rotary clamping element hydraulic DKHS1000 series
INSTALLATION AND OPERATING INSTRUCTIONS:
Rotary clamping element hydraulic DKHS1000 series
EN / 2021-03-09
DDOC00230 / f
EN / 2021-03-09
DDOC00230 / f
10 Installation
WARNING
Risk of injury due to uncontrolled movement
Risk of injury in case of unexpected movement of the machine or system into which the product is to be installed.
►
Switch off the machine before any work.
►
Secure the machine against being switched on unintentionally.
►
Check the machine for any residual energy that may be present.
Risk of injury during overhead assembly work
►
For overhead assembly work, select a suitable lifting or holding device.
Ö
The weight within the series may vary.
CAUTION
Risk of injury due to uncontrolled movement
Risk of injury in the event of unexpected movement of the product when the power supply is connected.
►
Switch off the power supply to the product before all work.
►
Secure the power supply against being switched on unintentionally.
►
Check the product for any residual energy that may be present.
NOTICE
•
The adjustment of the axle or shaft/shim (± 5 µm) is absolutely mandatory. The dimensions, shape and
position tolerances between the shaft and product must be adhered to within the specified and defined
parameters. Any deviation can result in damage to the product during continuous operation.
•
During installation, ensure that the mounting piece is sufficiently rigid and flat in accordance with Machinery
Directive 2006/42/EC.
• Ensure that the cutting rings and O-rings are inserted on the spotface.
• All mounting points on the product must be used.
• Tighten the mounting points crosswise.
• Hydraulic connection A = Pressurization
• Bleed connection C = Venting
10.1 Installing the mechanical system
bl
bm
bl
bn
