7
4) If a battery pack is in the charger cradle
and no light is illuminated, an error is
indicated. See page 14 for possible error
reasons and possible solutions.
6) Remove the battery pack from the battery
charger cradle (1, 2). The battery pack
is now ready for connection into the
stimulator. Remove the current battery
pack from the stimulator and place that
battery pack in the charger cradle
for recharging.
3) Following arrows, install the battery
pack into the battery charger cradle as
illustrated (1) Lightly press down on
battery pack to ensure contact (2). A solid
orange light on the charger cradle will
illuminate indicating battery is installed and
charging properly.
5) When the battery pack is fully charged a
solid green light should be on.
