Zimmer Biomet A.L.P.S., Surgical Technique

Page: 13 / 32

11 |
A.L.P.S.
Hand Fracture System
1.5 mm Plate Specifications
Plate Styles: Straight T Y Web T/Y Small T
Plate Width: 4.3 mm 20.4 mm 13.8 mm 12.8 mm 14.1 mm 13.5 mm
Plate Thickness: 1.1 mm 1.1 mm 1.1 mm 1.1 mm 1.1 mm 1.0 mm
Lengths: 61.7 mm 56.3 mm 49.6 mm 46.0 mm 39.3 mm 25.9 mm
1.5 mm Locking Cortical Screw
• CoCr screws for strength
• Self tapping tip minimizes the need for
pre-tapping and eases screw insertion
• Locking screw head designed to minimize
screw back-out and construct pullout
• Square drive
• Available in lengths of 8 – 24 mm
• Doubles as a multi-directional locking screw
1.5 mm Non-Locking Cortical Screw
• Self tapping tip minimizes the need for
pre-tapping and eases screw insertion
• TiMAX material
• Square drive
• Available in lengths of 8 – 24 mm
1.3 mm Non-Locking Cortical Screw
• Stand alone screw
• CoCr Screw for strength
• Self tapping tip minimizes the need for
pre-tapping and eases screw insertion
• Cruciate Head design
• Available in lengths of 8 – 24 mm
1.5 mm Small T Plate
• Specialty plate designed for mid-phalanx fractures
• Bridges shortened between nodes on the spine to allow
more screws to be inserted in the smaller anatomy
• Arms can be contoured in all 3 planes
(axial, coronal and sagittal)
• Spine can be contoured axially by skipping
one node between bending irons
• Cutter must be used to shorten the spine
• Plate holder can only be used on the arms
and not the spine