Z8 Encore! XP
®
F0822 Series Flash MCU Evaluation Kit
QS002507-1207
Page 4 of 9
3. Slide the new plug configuration into the slot until it snaps into place.
4. Plug the power supply into an electrical outlet.
Hewlett Packard Power Cord Method
Follow the steps below to connect the Universal power supply by the Hewlett Packard
power cord method:
1. Attach a power cord (purchased separately) featuring an AC plug at one end and a
Hewlett Packard socket on the other end to the Hewlett Packard power cord receptacle
at the plug end of the power supply.
2. Plug the power supply into an electrical outlet.
Installing the ZDS II Z8 Encore! Software
Follow the steps below to install the ZDS II software:
1. Insert the ZDS II CD into the CD-ROM drive of the host PC. The CD launches
DemoShield
automatically and provides a menu to install the product and
documentation. Select
INSTALL PRODUCTS
followed by
INSTALL ZDS II
to
display the Installation Wizard (see
).
Software versions displayed in the figure is for reference only. You may have
an updated version.
Figure 2. Installation Wizard (Reference Only)
Note: